- Built-in Power Switch ? Thoughtfully designed with a one-touch emergency stop to prevent spills from hose slip-offs or overfilling. Helps avoid accidental start-ups and reduces plug-in arcing to extend motor life.
- Fast & Clean Topsider Oil Change: Upgrade from messy under-car draining to a cleaner, easier way to change oil. This electric oil transfer pump removes old oil through the engine dipstick tube?no crawling under vehicles, no drain plugs, no waiting for slow drips, or manual pumping.
- Upgrade Overcurrent Protection: This oil extractor pump features upgraded flow capabilities and overcurrent protection, powering off if foreign objects are detected. With a copper motor for fast, stable suction, it ensures efficient extraction.
- Application: This oil extractor pump is ideal for DIY synthetic oil changes. Extracts motor oil, gear oil, and transmission fluid for cars, motorcycles, lawn mowers, boats, and Jet Skis. (Not for gasoline, diesel, or water).
- Quick Specs: 12V DC | 80W motor | Pumps up to 0.5L/min of motor oil.
Product description
Engine Oil Extractor Pump
What liquids can this pump handle?
What should I do before using the pump?
Why does the oil sometimes fail to extract?
What size of the hoses?
Pump Specs Table
What liquids can this pump handle?
Suitable for warm engine oil (0W-20, 5W-20, 5W-30, 10W-30, 10W-40), Light gear oil (75W-80, 75W-90), transmission fluid, and diesel.
High-viscosity oils may pump more slowly.
What should I do before using the pump?
Preheat the engine to 40?60°C before extracting old oil.
Cold oil is thick and hard to pump, which can cause the motor to draw excessive current and trigger the protection cut-off. Let the pump cool, then it will work normally.
Why does the oil sometimes fail to extract?
The pump is drawing air.
When pumping from the dipstick tube, move the suction hose up and down to ensure the tip is fully submerged. If the tip is partially exposed, the pump will draw air instead of oil.
What size of the hoses?
Inlet hose: 4 ft (6mm OD, 4mm ID)
Outlet hose: 5 ft (12mm OD, 9mm ID)
